Non -Stick Painting Aluminium Disc/Cirlce 1050 H14 with Deep Drawing for Cookware Utensils with thickness 0.5mm to 5mm
Material: These are manufactured using high-tech machinery utilizing premium grade Aluminium Coil.,Non -Stick Painting Aluminium Disc/Cirlce 1050 H14 with Deep Drawing for Cookware Utensils with thickness 0.5mm to 5mm
-- Very good deep drwaing
-- Packing: covered by water proof paper, wood pallet/box.
-- Widely used in cooking pan, home appliance and etc.
Aluminium Disc./ Circle
Alloy : 1050 1060 3003.
Temper O H12 H14 H16 H18
Application: cookware utensils, basin etc.
Thickness: 0.5-5.0mm.
Diameter: 100-1300mm.
Packing: in seaworthy wooden pallet or case and one ton per package.
Surface: mill finished,clean,bright,mirror,flat,no wholes,no scratches, no oxidation.
Alloy | Temper | Specification |
Thickness(mm) | Diameter(mm) |
1050,1060,3003 | O,H12,H14 | 0.50-5.0 | 100-1300 |
Temper | Thickness(mm) | Tensile Strength | Elongation% | Standard |
O | 0.5-5 | 60-100 | MORE THAN 20 | GB/T91-2002 |
H12 | 0.5-5 | 70-120 | MORE THAN 4 |
H14 | 0.5-5 | 85-120 | MORE THAN 2 |
Description:
Specifications of Aluminum Circle /Disc/Round:
1.Grade:
1000 Series:1050 1060 1070 1100 1200 1235 ect.
3000 Series:3003 3004 3005 3102 3104 3105 3A21 ect.
5000 Series:5005 5052 5083 5086 5154 5182 5251 5754 ect.
6000 Series:6061 6063 6082 6A02 ect.
7000 Series:7050 7075 7475 ect.
8000 Series:8006 8011 8079 ect.
2. Thickness0.20mm-320mm
3.Width:1220 or per customer’s request
5.Temper:all tempers,H1X,H2X,H3X,O HXXX
6.Continuous casting and hot rolled both available.
Chemical Compostion
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al |
1060 | 0.250 | 0.350 | 0.050 | 0.030 | 0.030 | - | 0.050 | 0.030 | 99.6 |
1070 | 0.200 | 0.250 | 0.040 | 0.030 | 0.030 | - | 0.040 | 0.030 | 99.7 |
1100 | Si+Fe:0.950 | 0.05-0.2 | 0.050 | - | - | 0.100 | - | 99.0 |
3003 | 0.600 | 0.700 | 0.05-0.2 | 1.0-1.5 | - | - | 0.100 | - | Remains |
3105 | 0.600 | 0.700 | 0.300 | 0.3-0.8 | 0.2-0.8 | 0.200 | 0.400 | 0.100 | Remains |
5052 | 0.250 | 0.400 | 0.100 | 0.100 | 2.2-2.8 | 0.15-0.35 | 0.100 | - | Remains |
5154 | 0.250 | 0.400 | 0.100 | 0.100 | 3.1-3.9 | 0.15-0.35 | 0.200 | 0.200 | Remains |
5754 | 0.400 | 0.400 | 0.100 | 0.500 | 2.6-3.6 | 0.300 | 0.200 | 0.150 | Remains |
5182 | 0.200 | 0.350 | 0.100 | 0.2-0.5 | 4.0-5.0 | 0.100 | 0.250 | 0.100 | Remains |
6061 | 0.3-0.7 | 0.500 | 0.100 | 0.030 | 0.35-0.8 | 0.030 | 0.100 | - | Remains |
8011 | 0.5-0.9 | 0.6-1.0 | 0.100 | 0.200 | 0.05 | 0.050 | 0.100 | 0.080 | Remains |
8079 | 0.200 | 0.300 | 1.0-1.6 | 0.100 | 0.6-1.3 | 0.100 | 0.250 | 0.100 | Remains |
